| FIXED MOUNTING HOISTS : * These are available in all types of mounting e.g. floor mounted hoists, ceiling mounted hoists, wall mounted hoists, etc. * All wire outlets and mounting positions can be together. * They are used for loading and unloading transportation vehicles, through floor hatches or outside the wall, and for serving production machinery. They can be used for any pulling or lifting applications. * When ordering, please state in what position the hoist is to be mounted and wire outlet ( WO ) required. HOIST WITH TROLLEY : * Hoist can be equipped with trolley for horizontal traveling. * The trolley is fabricated from components bolted and welded together and carried by traveling wheels supported on ball bearings. * Smaller loads can be moved with a push type trolley whilst the hand chain or motor driven trolley should be used for heavier loads. * The motor driven trolley would be the best solution if the hoist unit is required to move loads rapidly. * The drive motor is of squirrel cage type with built-in-brake. The motor drives one or more of the trolley wheels. * Wherever there are limitations to the available head room ( dimension H ), short head room trolley can be supplied (refer figure IV above). Note : * Specifications given in the catalogue are of our standard models of hoist. We can also supply hoist built specially to suit customers individual requirement. * Development being a continuous process at ' HAFA ' the Specifications and the data given in this catalogue are subject to change without prior notice. * The minimum radius of curvature in the beam for our standard models of hoist is shown in the given specifications, Special Trolleys for small radii can also be supplied. DATA TO BE FURNISHED BY PURCHASER : * CAPACITY IN TONNES * MAXIMUM HEIGHT OF LIFT REQUIRED IN METERS * DESIRED HOISTING SPEED IN METERS. / MIN. * TYPE OF HOIST MOUNTING ( IF FIXED MOUNTED ) I) WIRE OUTLET II) TYPE OF MOUNTING - A.B.C. OR D * TYPE OF TROLLEY (IF TROLLEY MOUNTED) I) PUSH PULL TYPE II ) HAND CHAIN WHEEL DRIVEN III) MOTOR DRIVEN * MONORAIL / BEAM SIZE. * HEAD ROOM-MIN HD ROOM DIMENSION PERMISSIBLE ( DIMENSION 'H' IN OUR FIGURE ) * A BRIEF DESCRIPTION OF THE WORK TO BE ACCOMPLISHED INDICATING THE NUMBER OF OPERATIONS PER HOUR. |